Terol Mineral Based Coatings

Terol is a range of polymer modified mineral renders designed for the finishing of EIFS substrates. Traditionally Terol, as a decorative finish, is available in the grades: Terol Decor, Terol Granule, and Terol Sahara. These are typically produced in a white colour and topcoated with Terracoat Stain to achieve the required colour.

New coloured additions to the Terol range are Terol Ultra and Terol Mono.

Terol Ultra is a revolutionary product that allows for finishing to be completed in adverse weather conditions. It can be applied at low temperatures without having to worry about wash-off and night time sub-zero temperatures. 

Terol Mono  is a one-product finishing system for Terraco EIFS. It replaces the basecoat, primer and decorative finish and allows for all “above-EPS” work to be done on the same day. For more information on this system please contact your nearest Terraco representative.

Terraco leads the way in developing new innovative products with the introduction of these new finishing systems.

Colour and Texture Selector – choose your texture and colours here.

TECHNICAL INFORMATION

Terol Decor
Description Coverage  Literature
  A 1.5mm or 2.0mm Alpine scratch finish which is top coated with Terracoat Stain.

Terol Decor 1.5mm: 3.0-3.5 kg/m²

Terol Decor 2.0mm: 3.5-4.5 kg/m²

TDS - Terol Decor

MSDS - Terol Decor

Packaging Features & Benefits
Application  
25 kg paper bags

Typically produced in a white colour and over coated to a colour of choice using Terracoat Stain.

Provides long life protection of exterior facades.

Superior weather and pollution-resistant properties.

Clean tools with water.

Environmentally friendly, water based.

Applied by steel trowel and patterned with a plastic trowel.  

 

Terol Granule
Description Coverage Literature
A level granular finish, available in various grain sizes, which is top coated with Terracoat Stain. 

Terol Granule 1mm: 2.5-3.0 kg/m²

Terol Granule 1.5mm: 3.0-3.5 kg/m²

Terol Granule 2mm: 3.5-4.5 kg/m²

TDS - Terol Granule

MSDS - Terol Granule

Packaging  Features & Benefits  Application  
25 kg paper bags

Typically produced in a white colour and over coated to a colour of choice using Terracoat Stain.

Being textured, it disguises minor substrate blemishes.

Superior weather and pollution-resistant properties.

Clean tools with water.

Stainless steel trowel.  

 

Terol Sahara Description  Coverage Literature
A fine textured random patterned product, trowel applied to a level granular finish which is over coated using Terracoat Stain. 2mm: 3.5-4.5 kg/m²

TDS - Terol Sahara

MSDS - Terol Sahara

 Packaging  Features & Benefits  Application  
25 kg paper bags

Typically produced in a white colour and over coated to a colour of choice using Terracoat Stain.

Provides long life protection exterior facades.

Superior weather and pollution-resistant properties.

Clean tools with water.

Applied by steel trowel and patterned with a plastic trowel.  

 

Terol Ultra
Description  Coverage Literature
  This product can be applied at low temperatures without having to worry about wash-outs and night time sub-zero temperatures.  2.0mm: 3.0-4.0 kg/m²

TDS - Terol Ultra

MSDS - Terol Ultra

Packaging  
Features & Benefits Application  
25 kg paper bags

It is designed for use even at low temperatures (4°C to 6°C) and high humidity conditions where other ready-mixed renders will not perform as they need extended drying times. 

Terol Ultra has a controlled setting time to ensure early rain resistance and to avoid problems associated with wash-off.

Terol Ultra is available in a selected range of fade resistant shades. 

Clean tools with water.

Applied by trowel to achieve a thickness of 2 - 3mm.   

 

Terol Mono
(Standard Finish)
Description  Coverage  Literature
  This product is a one-product finishing system for Terraco EIFS. It replaces the basecoat, primer and decorative finish and allows for all “above-EPS” work to be done on the same day.

Terol Mono is designed as a one-product finishing system:
Embedding Mortar
Apply a coat of Terol Mono direct to EPS surface and use a notch trowel to ensure application is even at 5 - 6 kg/m². Immediately embed the mesh and trowel into surface.
Finishing
Allow material to set-up for 2 - 4 hours and apply the finishing coat at 7 - 8 kg/m² by steel trowel. Bring the surface to a reasonable level and finish according to the desired pattern.

Terol Mono offers the following choice of finishes:
Monocouche finish
Allow to set-up for 2 - 4 hours and use a scratch-trowel to remove the top layer of material to create a classic monoconche finsh. (Standard Finish)
Dry Dash Finish
Once the Terol Mono surface is level, apply decorative stone to the surface by spray or by hand at rate of 5 - 6 kg/m² to create a classic dry dash finish.
Spray Finish
Apply a fine spray coat of Terol Mono by hopper gun to create a spray finish pattern. Allow the surface to cure overnight.
12.0-14.0 kg/m²

TDS - Terol Mono

MSDS - Terol Mono

Packaging   Features & Benefits Application  
25 kg paper bags

Terol Mono is a unique finishing system which can be applied as either a monocouche finish, dry dash finish or a spray finish.

It is a fully pigmented, polymer modified and a set-controlled render.

It is available in a range of standard colours.

Terol Mono is ideal for use on small fast track projects.

Clean tools with water.

Usually applied by trowel, but can be applied by machine.  

 

For more technical information please read Technical Data Sheets available on this page or contact the Terraco representative closest to you.